Hotel FF&E for public spaces
Lounge seating, banquettes, dining chairs, host stands and wall panels for hotel public areas, drawn to your specification and built in our own Foshan factory.
A sculpted, fully upholstered lounge chair whose back rolls continuously into the arms, lifted on a slim brushed-brass ring base.
A 71 in (180 cm) round banquette with seating all the way around a central planter, designed as the focal point of a lobby or atrium.
A tailored two-seat settee in forest-green channel tufting with cognac piping, a walnut cap and a recessed walnut plinth.
A rounded tub armchair upholstered all over in terracotta suede-look fabric, its back sweeping down into soft rounded arms.
A lounge chair upholstered in a saffron printed fabric with dark botanical sprays and butterflies, set in a black-stained solid-wood frame with angled runner sides.
Lobby, restaurant and bar seating from one factory, so fabrics, finishes and heights match across every outlet.
Halo Sculpted Lounge ChairAtelier Rolled-Arm Lounge Chair
Arc Two-Seat SetteeForest Channel SetteeCrescent Three-Seat Sofa
Drum Ottoman
Travertine Drum Coffee Table
Column Wrap BanquetteAtrium Round Island Banquette
Back-to-Back Island Banquette
Rotunda Curved Wall Banquette
Linear Banquette Module
R120 Curved Dining Banquette
Tailored Upholstered Side Chair
Low-Arm Dining Armchair
Cane-Back Dining Chair
Banquet Stacking Chair
Travertine Pedestal Table
Communal A-Frame Table
Counter-Height Banquette
Piped Bar Stool
Channel-Front Host StandMoss Shell Lounge Chair
Mosaic-Check Shell Lounge Chair
Two-Tone Wrap Tub Chair
Offset-Back Drum ChairTerracotta Suede Tub Chair
Houndstooth Seat Tub ChairSaffron Garden Print Lounge Chair
Nocturne Jungle Print Lounge Chair
Cane-Wrap Dining Armchair
Fluted Green Host Stand
Diamond-Tufted Framed Wall PanelA sculpted, fully upholstered lounge chair whose back rolls continuously into the arms, lifted on a slim brushed-brass ring base.
A fully wrapped bouclé lounge chair with soft rolled arms and a recessed walnut plinth, a quieter companion to sculptural lobby pieces.
A curved two-seat settee formed from one continuous arc, with a brass capping that follows the curve and a full-length seat cushion.
A tailored two-seat settee in forest-green channel tufting with cognac piping, a walnut cap and a recessed walnut plinth.
A 79 in (200 cm) curved sofa with a continuous back that wraps to both ends, a single seat cushion and brass capping following the arc.
A 19.75 in (50 cm) upholstered drum ottoman on a brass ring base that works as a footrest, a tray stand or an extra seat.
A 31.5 in (80 cm) round coffee table with a 1.5 in (4 cm) travertine top on an open black-steel drum frame, set just below lounge seat height.
A four-sided banquette that wraps a structural column, turning a dead obstruction in a lobby or restaurant into about eight seats.
A 71 in (180 cm) round banquette with seating all the way around a central planter, designed as the focal point of a lobby or atrium.
A double-sided 79 in (200 cm) banquette with a shared spine and rounded ends that serves two rows of tables, about eight diners, from one piece.
A banquette drawn to follow curved walls, including walls whose radius changes along their length, with continuous back and brass trim.
A straight banquette module with a flat back, brass top capping and square ends that join into continuous runs, sized in 12 in (30 cm) steps.
A curved banquette on a 47 in (120 cm) inner radius that seats five to six around a 35.5 in (90 cm) round table, with brass trim following the curve.
A fully upholstered dining side chair with a slightly raked back, piping outlining every edge and slim black-steel legs.
A dining armchair with a continuous light-oak U-frame and arms at 24.5 in (62 cm), low enough to slide under a 30 in (76 cm) table.
A smoked-oak dining chair with natural cane webbing in the back and a removable upholstered seat pad.
A light upholstered steel chair that stacks eight high and weighs about 12 lb (5.5 kg), for meeting rooms, ballrooms and flexible F&B spaces.
A pedestal dining table with a 2 in (5 cm) travertine top on a flat black-steel column, in square, round, counter and bar heights from one base family.
A 94.5 × 35.5 in (240 × 90 cm) communal table for ten, with a travertine top on two black-steel A-frames and a brass tie rod beneath.
A 63 in (160 cm) banquette with a 24 in (61 cm) seat for 36 in (91 cm) counter tables, on a black-steel frame with a brass footrail.
An upholstered bar stool with a rounded back, contrast piping, splayed black-steel legs and a brass foot ring, at bar or counter height.
A freestanding host stand with an upholstered channel front and brass inlays, built with a 42 in (107 cm) guest side and a 36 in (91 cm) staff work surface.
A lounge chair with an olive leather outer shell, a textured jacquard seat and back cushion, and slim brushed-brass legs joined by a brass ring.
The olive-leather shell lounge chair dressed in a multicolour woven check for seat and back, on brushed-brass legs and base ring.
A low tub chair in two leathers: a tan outer shell that wraps around a cream drum-shaped seat, finished with a tan welt at the base.
A round upholstered drum seat with a curved back that wraps only one side, upholstered all over in a pale oatmeal chenille.
A rounded tub armchair upholstered all over in terracotta suede-look fabric, its back sweeping down into soft rounded arms.
A burnt-orange leather tub chair with a separate rolled top rail and a black-and-white houndstooth seat, on a recessed metal base.
A lounge chair upholstered in a saffron printed fabric with dark botanical sprays and butterflies, set in a black-stained solid-wood frame with angled runner sides.
A black-stained timber lounge chair with angled runner sides, upholstered in a dark jungle print of tropical leaves, flowers and birds.
A dining armchair with an orange leather seat and inner back, wrapped outside by a walnut-stained frame filled with woven cane.
A compact host stand with a deep-green upholstered fluted front, a walnut top with rounded corners and a brushed-brass plinth.
An upholstered wall panel in ivory bouclé with diamond tufting and cognac leather piping, set in a light oak frame.
At a glance
Lobby Seat (a line by EASEN Commercial Furniture) manufactures furniture for hotel public areas, from lobby lounge chairs, sofas and ottomans to restaurant banquettes and chairs, bar seating, host stands and upholstered wall panels. Everything is made to order in our own production base in Lecong, Foshan, China, to the designer's specification and approved shop drawings, then shipped factory-direct to the project or the purchasing agent's consolidation point.
Send the FF&E specification, drawings and quantities. We review constructability, flag gaps or conflicts, and return a priced quote with lead times by item.
Each item is drawn with dimensions, construction and finish codes. Finish and fabric samples go to the designer. Production starts only on signed drawings.
For key pieces we build a pre-production prototype for review in person, by video or at a mock-up room. Comments are folded into revised drawings before the run.
Items are produced in our Lecong workshop, checked against approved drawings and samples, photographed and tagged by area, room or zone code for the receiving warehouse.
How hotel FF&E ships from a Foshan factory: lead times, area-by-area labelling, container consolidation, Incoterms and customs for US, EU and Middle East.
The stages of hotel FF&E procurement, from specification and shop drawings to prototypes, production, freight and installation, with durations and a checklist.
What counts as FF&E and what counts as OS&E in a hotel project, where the grey areas sit, how the FF&E reserve works and how to keep budgets from overlapping.
Lobby Seat is a product line of EASEN Commercial Furniture, a manufacturer with its own production base in Lecong, Shunde District, Foshan, China. We make hotel public-area furniture to order, including lobby seating, banquettes, F&B outlet furniture, bar seating, host stands and wall panels, and ship it factory-direct to hotel projects.
Yes. Most of our hotel work comes through interior designers and FF&E purchasing agents. We quote against the FF&E specification, provide shop drawings and finish samples for designer approval, and coordinate logistics with the agent's freight forwarder or receiving warehouse.
Yes, building to specification is the core of what we do. Send drawings and the spec sheet; we return shop drawings showing construction, dimensions and finishes. Any proposed change, such as a different foam density or joinery method, is marked on the drawing for approval, never substituted silently.
Yes. We calculate customer's own material (COM) or customer's own leather (COL) quantities from the approved shop drawings, including repeat, railroading and waste, and send the figure before you order. Material should be shipped to our factory with the project and item references marked on each roll or hide bundle.
We specify fire-retardant foams, interliners and contract-grade covers to the destination market's rules on request: for example CAL TB 117-2013 in the US, BS 7176 composites in the UK, and EN 1021-1/-2 in much of Europe. Test reports are supplied for specific items where available. Final requirements are set by the project's fire consultant or authority.
Typically 30-45 days for standard designs and 45-60 days for custom work, counted from approval of shop drawings and samples, plus sea transit. Exact dates are confirmed in each quote and can be phased by area to suit a hotel's opening programme.
Share your FF&E specification, drawings or a short project brief with quantities and target dates. We reply with a quote, clarifications and lead times by item.
Request a quote →